Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Arne

Pages: [1] 2 3 ... 33
Proxomitron Updates / Proxomitron 4.4
« on: October 09, 2002, 03:54:22 PM »
Proxomitron 4.4 Released

Downloads Click here

New stuff in Naoko 4.4

* Added KEYCHK command. This can be used to test for keypress
combinations inside a filter. It works like any matching test
and can be used in a filter's match or a URL match. When the
match is done KEYCHK will return as "matched" if the keys
being tested for are currently pressed. Most keys can be tested
by using their *unshifted* values. However, there's several
special key tests which begin with a carat "^" symbol....

^A = ALT
^T = TAB
^F1 = Function key #1
^F2 = Function key #2
^32 = Virtual keycode 32 (spacebar)
^65 = Virtual keycode 65 ("A")

These are not case sensitive so either "^c" or "^C" may be used.
Multiple keys can be included to test for combinations. For


This will work for any combination the keyboard allows. Other
special keys can also be tested if you know the Windows virtual
keycode - this is a number between 0-255. For instance ^2 tests
for the right mouse button.

* Added LOGFILE option to blockfiles. Adding this keyword to the top
of any blockfile tells Proxomitron not to treat the contents as
matching tests or to load them into memory. This makes it safe to
use the file as a log file when using $ADDLST(). It also increases
speed - normally $ADDLST opens the file, appends the new entry, and
then closes the file again. However in LOGFILE mode the file will
remain open between writes to make inserting large amounts of data
much more efficient.

It's important to keep this in mind if you load a logfile into another
program while it's in use since recent entries may still be in the
file buffer and not written yet. However, reloading the config or
editing a log via the "Edit blockfile" option from a Proxomitron
menu will flush any unwritten data to the log. You can give your
logfiles a filename extension other than ".txt" then associate that
extension with a specialized logfile viewer if you wish. This allows
the "edit blockfile" option to be used to launch your log viewer.

* Added $FILE(filename) command. This will insert the contents of any file
into the replace section of any filter. It's most useful in web filters,
but will work in header filters too (keep in mind headers should only be
one line and no more than around 4k in size).

* Added $RESP(match) matching command. This command can be used to match
or capture the response code returned by a web server. Normally this
will look something like...

"200 OK" or "404 Not Found" etc.

The match starts directly with the return code so does not include the
"HTTP/x.x" portion of the reply line. However any message text after
the code is included in the match. For example, to match redirects
you could use "$RESP(302*)". This can also be useful to capture this
information for a log file.

* Entries added to a non-existent blocklist will cause a new "temporary"
list to be created with that name. This list will be memory only, and
can be used like a hash array to store information globally. Note that
the list won't appear on any menus and can't be edited (since it's not
a file), but can be called in a match and added to just like any other

Also keep in mind reloading the config or restarting Proxomitron will
clear all temporary list. Use a normal file based list if you wish to
store the information longer term.

* Multi-match replace buffers can now insert any amount of data
as long as there's enough memory (previously they were limited to 32k).
Keep in mind when desigining filters this does allocate extra memory,
so should be used carefully (especially if using the new $FILE command).

* Fixed error with stale file handles being reused - may help the
"half-loaded" page problem some people were reporting.

* Fixed reused connections still using the proxy after "Use remote
proxy" has been deselected.

* Fixed "Read overflow" warning from needlessly popping up.

* Fixed bug that could cause some hostnames not to resolve properly
when contacting a webserver on ports other than 80.

* Created a work-around for servers that send "deflate" content
encoding with/without the normal header bytes. Seems not all
servers format it the same.

* Updated proxcert.pem for another year. This is a self-signed
certificate Proxomitron uses for it's experimental SSL filtering
(not enabled by default). It's not an actual valid server

Best wishes
Imici username= Arne

Questions and Answers / mySQL in new forum
« on: September 19, 2002, 08:13:24 PM »
mySQL in the new forum has crashed regularly the latest days, and I can assure you that I have written complaints each and every time I have seen this happen. You can also feel free to complain too: [email protected]
 is the complaint address to my ISP. I assume I have written more than 100 complaints since I rented this place

Best wishes
Imici username= Arne

Site Specific / Filter for
« on: September 08, 2002, 03:38:31 PM »
Siden dere alle mere eller mindre bruker Start, s? har dere her et forenklet filter som vil fjerne det meste av t?yset p? start:

Denne filen lagrer dere som kommentarer.cfg i Proxomitrons mappe:

List.BlokkFjerning = "..ListsBlokkFjerning.txt"

Name = "Fjern: Blokker mellem kommentarer"
Active = TRUE
URL = "$TYPE(htm)"
Limit = 12000
Match = "<!-[^>]++{0,32}$LST(BlokkFjerning)"
Replace = "<center>"
"[Fjernet: 21]</center>


Denne filen lagrer dere som BlokkFjerning.txt i en undermappe til Proxomitron mappen som heter Lists. Dersom den ikke er der, s? lag den.


egenann.html*/logotabell1(?)++{0,40}--> $SET(2=logotabell )
s?ktabell*/s?ktabell1(?)++{0,40}--> $SET(2=S?k )
globalmeny*/globalmeny1(?)++{0,40}--> $SET(2=globalmeny )
tegneserier*/tegneserier1(?)++{0,40}--> $SET(2=tegneserier )
test deg selv*/test deg selv1(?)++{0,40}--> $SET(2=tester )
logg inn*/logg inn1(?)++{0,40}--> $SET(2=logg inn )
ad 150 plassering 1*WebMeasure slutt1(?)++{0,40}--> $SET(2=Resten)


Deretter velger man File og Merge Config Filters og velger kommentarer.cfg Deretter lagrer man med f.eks CTRL+D

Vips! S? er all dritten borte fra Start. Dersom man vil ha bort kommentarene som skrives av filteret, s? er det bare ? fjerne dem ogs? fra selve filteret. (Bare fjern hele "Replacement text")

S? er det bare ? legge til i text filen s? mye man gidder av blokker man vil ha fjernet fra andre websider.

Det orginale filter er laget av Sidki3003

Best wishes
Imici username= Arne

Site Specific / Filter for
« on: September 08, 2002, 03:36:44 PM »
Here is one to screw up their trackerbug:

Name = "javafilter start"
Active = FALSE
URL = ""
Bounds = "$NEST(<script,</script>)"
Limit = 512
Match = "1document.referrer2"
Replace = "1"

Best wishes
Imici username= Arne

Questions and Answers / THIS FORUM WILL CLOSE
« on: September 06, 2002, 01:11:11 PM »

Hi Arne

I hate being an idiot.  When registering at the new forum, I mada an error in my email address, which occurred to me about one second after I submitted.

Any way to fix it or will I have to register with new username?




I will delete your submission so you can send it again.

Seems as if you have solved your problem, as you have made posts there?

Best wishes
Imici username= Arne

Questions and Answers / THIS FORUM WILL CLOSE
« on: September 06, 2002, 01:10:20 PM »

I just tried to register, but had the same problem that Lea724 had not being able to get past the agreement page, it just keeps looping me back.

"Let every man be swift to hear, slow to speak, slow to wrath"

James 1:19 <><

Your email address is not working. I know because I tried to send you an email and it was returned. So that is why you are having problems.

Best wishes
Imici username= Arne

Questions and Answers / THIS FORUM WILL CLOSE
« on: September 02, 2002, 04:09:03 AM »
It is not advicable to use Proxomitron on a forum like this. There are many reasons for that.


  • The site uses cookies, javascript and referers.  

  • I sometimes ban people bsed upon referers, IPs and other things  

  • Many of the filters here will be parsed by Proxomitron so that you do not see the actual filter and will copy something wrong which will not work at all.  

Best wishes
Imici username= Arne

Questions and Answers / THIS FORUM WILL CLOSE
« on: September 02, 2002, 03:59:28 AM »
Come to think of it, it will not work with a direct link. You have to have the referer from the policy page. Did you remember to allow cookies, referer and javascript?

Best wishes
Imici username= Arne

Questions and Answers / THIS FORUM WILL CLOSE
« on: September 02, 2002, 03:51:07 AM »
try this link
You are probably stuck in your own cache and would have needed to empty it.

Best wishes
Imici username= Arne

Questions and Answers / THIS FORUM WILL CLOSE
« on: September 02, 2002, 02:49:34 AM »
I have tested it after I made the last correction ? hour ago (not quite that long) and it works fine for me. sidki3003 also made it in. You should try it again now. Just tell me if you don't get the correct page now :-)

Best wishes
Imici username= Arne

Questions and Answers / THIS FORUM WILL CLOSE
« on: September 02, 2002, 02:15:51 AM »
Now that my mistake is solved, I have begun opening the locked forums for the public here. This means that the forums I lock for posting will at the same time be readable without having to be logged in. It will just be a pain if we have to log in here as well as in the new forum. And also a pain for new members in the new forum to also have to subscribe here just for reading our old posts.

And by the way. If anyone have PMs that they wish to save, now is the time to save them localy. Tomorrow I will run a program that will delete every PM there is in this forum. So check your inboxes to see if you have anything you wish to save. I do not read the PMs, but I do run a program that deletes them.

Best wishes
Imici username= Arne

Questions and Answers / THIS FORUM WILL CLOSE
« on: September 02, 2002, 02:00:35 AM »
Thanks! I found my mistake and have corrected it

Best wishes
Imici username= Arne

Questions and Answers / THIS FORUM WILL CLOSE
« on: September 02, 2002, 01:46:28 AM »
I will look into it right away

Best wishes
Imici username= Arne

Questions and Answers / Restore pop-ups after page loads
« on: September 02, 2002, 01:20:31 AM »
Sorry to bother you with this, but please post your question in the new forum. Read the post below for more information and the bold link at the top Sorry for any inconvinience!

Best wishes
Imici username= Arne

Questions and Answers / New forum topics
« on: September 02, 2002, 12:56:43 AM »
Since I now have locked many of these forums for further discussion and I might have locked topics which you might wish to discuss further, I will let it be up to the authors to copy topics from here and into the new forum for further discussion or for easier access.

I would in fact like it if the authors of filters and configuration files, copied these into the new forum so that we do not have to bounce back and forth between the forums to be able to find your good filters.

The forum here "Questions and Answers" will be locked for posting tomorrow and new topics will not be allowed from now on. Please use the new forum from now on

Best wishes
Imici username= Arne

Pages: [1] 2 3 ... 33